Ampcontrol hub

Firmware Updater - IPM3

Firmware Updater - RKS

Industry Notification - Rockstarter Touchscreen Glass and Digitizer Replacement

IN00030

Technical Datasheet - ELV 60Hz

The ELV 60Hz Earth Leakage Relay provides a definite time operating characteristic with adjustable trip sensitivity and time delay.

Technical Datasheet - IPM3

The IPM3 is an Integrated Protection Relay for mining and industrial applications. Designed to operate with multiple system voltages, it provides the necessary outlet protection functions as well as selectable pump and fan operating modes. The Integrated Protection Relay provides the necessary functions required for protecting electrical outlets supplying mining machinery, with protection compliance to AS/NZS 2081:2011.

Industry Notification - Counterfeit Earth Leakage Toroid

IND00031

Ampcontrol I.S. Battery

The Ampcontrol Intrinsically Safe Battery is engineered to deliver a reliable and continuous power source to a broad range of industrial equipment.

Technical Datasheet - NB I.S Zener Barrier

Ampcontrol NB Intrinsically Safe Zener Barrier is designed to be installed in a safe area. Its output is Intrinsically Safe and allowed to enter Group I Hazardous areas. The Barriers consist of Zener diodes, power limiting resistors, fuses, and input/output screw terminal connectors

Technical Datasheet - 110 V AC Constant Voltage Power Supply

The Ampcontrol 110 V AC Power Supply incorporates switched mode power supply and inverter modules to provide a stable 110 V AC rms 50 Hz isolated supply across a wide input range.

Industry Notification - ELV-PRO Hardware Update

IN00029

Whitepaper - ECM3 a fresh look at earth continuity

Ampcontrol has developed an innovative method of earth continuity protection in the form of the Ampcontrol ECM3 Protection Relay. This new relay utilises an “impedance versus trip time response” to provide discrimination between an open circuit and a gradual increase in the measured pilot/earth loop impedance of the protected cable.

Firmware Updater - PF1 Relay

This application executable (PF1_FUD, PF1 Firmware Update) will identify a connected PF1 relay and verify its firmware.

Firmware Update User Manual - IPM3

Provides an outline of the steps involved in the IPM3 firmware update procedure

Technical Datasheet VCA Remote Keypad

The Voicecom Remote Keypad is a keypad interface for use with the Voicecom Controller (VCA) and is a part of the Ampcontrol Voicecom system.