Technical Data Sheet – iMAC CRM

The iMAC CRM Module is an Intrinsically Safe Control Relay output module for the iMAC System. The iMAC CRM provides remote mirroring of the iMAC Controller’s Control Relay (CR). There are three CRM variants to suit 24VDC, 110VAC, or 240VAC power supplies.

Download

Technical Data Sheet – iMAC MLB

The iMAC System has been approved as Intrinsically Safe for use in Group I mining applications. The iMAC Master Line Barrier (MLB) facilitates this by limiting the amount of power that can be transmitted into a hazardous area.

Download

Technical Data Sheet – iMAC DI8

The iMAC-DI8 Module is a general input module for the monitoring of 8 voltage free contacts. The nominal sense voltage is 14V with a nominal current limit of 4.7mA. The iMAC-DI8 Module is housed in a DIN rail mountable enclosure and is powered directly from the iMAC L1 communication line (Non IS applications only). There is therefore no need for an external power supply.

Download

Technical Data Sheet – iMAC DI4

The Ampcontrol Non Volatile Memory DI4 Digital Input Module is IS (Intrinsically Safe). The Module has four normally closed digital inputs. The sensing voltage is 3V and the sensing current is 1mA. The electronics are encapsulated in a plastic enclosure that is small enough to fit into a lanyard type switch to indicate the switch’s operation.

Download

Technical Data Sheet – iMAC IIM

The iMAC IIM Module is an intrinsically safe contact input and LED output module. Typical applications include remote isolation control and display, status and control of conveyor signal lines, remote indication and secure monitoring in a hazardous location.

Download
Load More results